Getting Down Deep

Carpet Cleaning Using New Technology

Grimy, stained carpeting can make even the most elegant and beautiful home look tired and un-cared for. Professional carpet cleaning is the only way to keep carpets stain free, fresh and looking as good as the day were installed. Clean carpets will increase the value of a home by appearing more visually pleasing, healthier looking and longer lasting than poorly maintained and neglected carpets. Within recent years, new carpet care chemicals and technologies have been developed by the chemical industry, which work better, are easier to use without any special training, are less prone to re-soiling and saves time and money. Professional carpet cleaning will beautify your carpets by removing stains, grit, sand, dirt, allergens, and will sanitize and deodorize your floor coverings.

Carpet Cleaning Methods

HOT WATER EXTRACTION

As opposed to steam cleaning, hot water extraction works by spraying heated water, with or without added chemicals, onto the surface of the carpet while simultaneously vacuuming to extracting the water, which carries along with it dissolved and dislodged dirt. Hot water extraction is one of the most preferred methods of carpet cleaning by manufacturers of quality carpets, as steam has the potential of damaging the fibers of carpets, particularly man-made fibers, and actually shrink natural fibers like wool.

The advantages of using hot water extraction is that effective cleaning is achieved by using purely water, or sometimes heavily diluted solutions of mild cleaning agents. This method avoids the problems of detergent residue build-up, which attracts dirt, causing the carpets to become soiled again very soon after cleaning. Detergent residue is also extremely damaging to the carpet fibers, cutting short the life of the carpet.

Hot water extraction is advantageous in situations where the inhabitants of the home are concerned about chemical exposure during the cleaning process, as well as residual chemicals that are left behind in the carpets, only to be dislodged by the friction of moving feet, and entering the air. Heavy chemical detergents used in some cleaning methods are present in the air for days after the carpets have been cleaned, evidenced by the strong chemical smell emitted from the carpets.

It is critically important that most of the water be extracted from the carpets during the cleaning process by using powerful industrial water extraction equipment, to avoid the growth of mold, particularly in high humidity conditions. After hot water extraction cleaning, evaporation can be sped up with good ventilation and the use of dehumidifiers, heating and air conditioning.

DRY CLEANING

The process of dry cleaning carpets rely heavily on the use of specialized machines, which are technically known as VLM (Very Low Moisture) systems, and the use of dry compounds and cleaning solutions. The most significant benefit of dry cleaning is the quick drying time, resulting in completely dry carpets within 24 hours of cleaning. There are five basic methods used in the dry cleaning process:

1. Dry Compound
A biodegradable and highly absorbent compound is applied, which attracts dirt, and then vacuumed, leaving the carpets clean and dry almost immediately afterwards.

2. Encapsulation
Working like small sponges, polymers crystallize, encapsulating particles, transforming them into dry residue on contact. These polymers are applied by special machines with rotating brushes, brush applicators or compression sprayers. Encapsulation improves the appearance of the carpet far better than other methods and carpets remain cleaner for longer. As there is no drying time with this method of carpet cleaning, the surfaces are available for immediate use, making it especially beneficial for offices.

3. Bonnet
This method makes use of a machine with a round “bonnet” which resembles a floor buffing machine. The spinning pad attracts dirt, and is rinsed and replaced repeatedly. This method is not strictly a dry cleaning method as it involves a significant amount of drying time.

4. Shampoo
Traditional wet shampooing, using coconut oil based detergents, have been replaced with synthetic detergents. These shampoos dry to a powder, to which loosened dirt attaches itself and the resulting powder is left in the carpet to complete its action. This method requires vacuuming of the carpets the following day.

5. Dry Foam
Although the name implies a dry method, the process does have low moisture content. The detergent used is whipped into a dense foam in a machine with a pressure tank, applied to the carpets and removed afterwards by vacuuming. Because of the moisture, this method does require some drying time.

Carpet cleaning should be done on a regular basis to maintain and preserve a valuable asset in your home. During intervals in between professional carpet cleaning, carpets should be kept free of dirt, grime and dust by frequent vacuuming and prompt stain removal.

The Benefits of Using Urine Odor Removal Products

The smell of dog, cat, or human urine is enough to drive anyone out of the home in search of a remedy to remove the odor. However, most urine odor removal products simply masks the problem using perfume, instead of eliminating the smell altogether. When the urine gets stuck in pores materials including tile grout, it can be nearly impossible to remove without the right products.

When using the best urine odor removal products, it is easy to eliminate stains and intense smell from clothing, mattresses, flooring materials, furniture and more. These odor control systems tend to be highly effective because they break down the chemicals in the urine causing the smell.

These products are oxygen-infused and can penetrate deep into the flooring materials to eradicate every trace of urine including the residue on the surface that is often extremely sticky.

Removing Urine from Clothing

The lingering odor of urine can last for weeks or months at a time. There are basic methods for removing urine odor from clothing. This includes filling the washing machine with water along with up to one half gallon of vinegar or borax with the detergent. This tends to neutralize the smell. However, the vinegar can ruin delicate fabrics including chiffon and other polyesters.

Removing Urine from a Mattress

The size of the mattress makes it nearly impossible to get the smell of urine out of its fabric. However, there are certain tactics that have been proven effective in many cases. This includes using:

1. Baking Soda – Sprinkling more than a generous amount of fresh baking soda directly on the urine stain on the mattress can help. Allow it to sit on the service for a few hours before vacuuming it away.

2. Vinegar – As a natural solution white vinegar tends to remove most odors because it neutralizes the smell. Mix white vinegar with hot water, and pour a tiny amount on the urine spot located on the mattress. If possible, move the mattress outside to allow the sun to dry the area for a few hours. If that is not possible, position a fan on high-speed directly over the treated area and leave it there until the area dries.

3. Diluted Bleach – Bleach in a diluted form can remove the smell of urine, and diminish any yellow stain left behind. Dilute the bleach in warm water and squirt it out of a spray bottle onto the affected area. It may require repeated attempts to eradicate the smell altogether.

4. Enzyme Cleaners – There are products available on the market formulated with natural enzyme cleaners to rid the mattress of urine smells. Many pet shops and online markets carry professional enzyme cleaners that work well with human and pet urine stains and odors.

Removing Urine from Flooring Materials

Pet and human urine stains and odors on flooring materials are often challenging to remove. Even so, there are a few products that can neutralize the area to minimize if not alleviate the entire odor. These different household products include hydrogen peroxide, enzyme odor removers, diluted bleach and white vinegar. Each one has the ability to neutralize the odor. Bleach also helps lift up the stain.

Removing Urine from Furniture

Furniture upholstery is one of the most susceptible fabrics in the home to pet urine. Even so, there are effective remedies for removing the urine odors and stains without damaging the delicate fibers. These include baking soda sprinkled directly on the stain and vacuumed after a few hours. In addition, many floor shampoo systems have a mini-attachment specifically designed to remove stains from furniture fabrics. Many cushions have a zipper along the back, where the fabric can be removed. This allows the cushion fabric to be washed, according to the directions on its label.

Even though not all urine has a strong smell, its sticky properties easily attach to anything when it dries. Because of that, it is imperative to see if the urine can be removed in the house from flooring, mattresses, furniture, and clothing.

Typically, the best urine odor removal products contain ingredients that break down the odors and stains, so they can no longer produce a smell, even if left behind. It is important to purchase a product that requires little labor, has the ability to get into porous materials, and eradicates the problem, instead of simply masking it with perfume.

Hiring a Water Damage Restoration Company

Water damage restoration performed by a licensed professional team is often necessary whenever a home has been flooded with water. This is because restoring the home to its prior condition requires more than just mopping the damaged area and allowing the air to dry it out. If not properly handled, the damage can create serious issues including a hazardous health condition for every member of the household.

Water damage in a home is often a result of a broken water line, backed up sewer pipe, leaking roof, overflowing tub or toilet, or flood from outdoors. When this happens, it is essential to hire an experienced water damage restoration team as quickly as possible. This will help avoid any secondary damage to the ceiling, walls, furnishings, floors, appliances and fixtures inside the house.

Evaluating the Problem

The first step that a water damage restoration company will take is to evaluate the problem, and determine the source of the water. Once located, they can stop the leak, backup, or water penetration through the exterior walls. Next, they will assess the damage and use a variety of moisture detection devices including hydrometers and infrared cameras to find levels of water and moisture behind the walls and under flooring. With this information, they can develop an effective plan of attack in how to restore the home back to its prior condition.

Extracting the Water

The damage caused by water inside the house is often deceptive. There are many areas of the house, including under flooring material, under stairways and behind sheetrock, which are impossible to see. When water or moisture accumulates in these areas, it requires special methods to extract the liquid, including taking down parts of drywall and lifting up flooring materials.

Once all the water has been detected, the team of water damage restoration specialists will use extraction equipment. This might include gas powered submersible pumps and HEPA vacuums to suck up the moisture to minimize humidity levels inside the home.

Mold Remediation

Within the first few hours after the flooding subsides, mold and mildew along with other harmful contaminants can begin to take hold. This is because moisture and standing water create the ideal breeding ground for bacteria, mold, pathogens, viruses, and fungus. When left untreated, the contaminants can easily take over the house, requiring it to be condemned.

Sanitize/Deodorize

After the technicians have removed all standing water and high levels of moisture in the area, they can begin the sanitize/deodorize process of restoration. This includes using industry standard sanitizing and deodorizing chemicals to eradicate any growing mold or other harmful contaminants, and minimize the amount of odors they produce. These chemicals will help eliminate any growth of mold after the restoration process is complete.

Drying The Area

The only way to ensure that the area is completely dry is to use industrial-size air blowers. These massive fans move an exorbitant amount of air across the surface of the damaged area and along furnishings and fixtures. The air is blown to the outdoors for at least 36 hours. During this time, the technicians will check the humidity levels in the home.

Once the house reaches 15 percent humidity or less, they can begin the restoration process of reconstructing the damaged area. This often involves installing new drywall to the damaged areas where the sheetrock was removed, along with new flooring materials including carpeting, hardwoods and tile. It will also include fresh coats of paint to restore the area to the condition it was in prior to the flooding and water damage.

Creating a Safe Interior Environment

Only through proper water damage restoration methods can the household be assured that the performance of the specialists have created a safe interior environment. This means that growth of mold in the future has been eliminated, along with the potential of any secondary water damage to the building materials and/or furniture.

In many incidences, the water damage restoration company will work directly with the homeowner’s insurance company to provide all necessary documentation for financial compensation.

Restoring the home to its original condition after water damage is not a do-it-yourself home improvement project. It requires special skills, training and equipment to ensure that the job is handled properly and safely.